AfricaTwin.co.uk - XRV750 > Fitting a Leo Vince SBK Evo III Exhaust to XRV750W (7A) Africa Twin

LEO VINCE SBK XRV750 AFRICA TWIN EXHAUST available from dualsport.com
	The original exhaust before removal
The first task is to soak the flange clamp in WD40 or similar.	Next remove the two bolts that hold the exhaust to the bike and loosen the flange clamp Then remove the old exhaust hanger

Remove the Right pillion peg then refit with exhaust mount behind
	The Leo Vince exhaust is significantly smaller and half the weight of the original exhaust
Fit connector pipe to silencer then line the exhaust up against the bike Ensure the pipe is vertically aligned then fit into place with the straps in the kit
	Finally refit the side panel The exhaust is E-Marked with a removeable core which should not be removed for road use. With the core removed the throaty V-twin sounds magnificent but not too loud. I've no idea what the dB would be to say if it is legal without the core in the UK

Website by Craig Owen